UPS PIco HV3.0A Stack with 450mAh Battery
Item Details
UPS PIco HV3.0A Stack with 450mAh Battery
Item Name
UPS PIco HV3.0A Stack with 450mAh Battery
Item #
PM_030
Price/ea
€29.48  €19.99
Average Rating

Product Image Gallery

UPS PIco HV3.0A Stack with 450mAh Battery

product description

Intelligent Mobile Power Bank and Uninterruptible Power Supply

with RTC, Peripherals and I2C control Interface

Designed Especially for the Raspberry Pi® 3

compatible with

Raspberry Pi®: Pi 2, Pi Zero,  Pi A+, Pi B+

3A total current Supply with GPIO Powering Input and Battery Back-Up

Hardware RTCC, Bi Stable Relay (optional), 3 x 12 bit Fast prescaled A/D, Intelligent ON/OFF switch

User Selectable Assembly Service

Flat Shipping Rate with Registered Air Mail only 6 EURO over the world for any QTY ordered

Special offer - limited quantity available

 

Ordered Item contains:

  1. UPS PIco HV3.0A HAT Stack with Battery 450 PCB with all described below long list of features
  2. LiPO Battery 450 mAh 15C
  3. Not Soldered 2 x 8 Pins headers for all specified below I/Os
  4. Not Soldered Gold Plated Reset Pin
  5. Not Soldered Electromagnetic Sounder
  6. Mounting Spacers, screws, nuts need to mount on the Raspberry Pi® microcomputer

Ordered Item does not contain and should be ordered separately if needed for specific application:

  1. Infrared Receiver
  2. High Capacity Batteries (1500 mAh, 4000 mAh, 8000 mAh)
  3. Bi-Stable (Zero Power) Latching Relay with appropriate TB
  4. PIco single LP/LF 18650 Battery Holder
  5. PIco double Li-Ion 18650 Battery Holder
  6. UPS PIco HV3.0A Terminals Blocks PCB
  7. PIco FAN Kit 3.0

 

System Overview

The UPS PIco HV3.0A HAT Stack with Battery 450 is an advanced Uninterruptible Power Supply for the Raspberry Pi® A+/B+/2/3 and ZERO/W, that adds a wealth of innovative power powering/back-up functionality and development features to the innovative microcomputer! The UPS PIco HV3.0A HAT Stack with Battery 450 will automatically shut-down your Raspberry Pi® if there is a power failure, and can be set to automatically monitor and reboot your Raspberry Pi® once power has been restored! 

The UPS PIco HV3.0A HAT Stack with Battery 450 features a 5V 3A total current output on battery, designed for use on the latest Raspberry Pi 3!

UPS PIco HV3.0A HAT Stack with Battery 450 offers now 3 User Programmable Keys, 3 User programable LEDs, support for multiple different chemistry of high capacity batteries, 2 x 3 pins bi-stable relay (Zero Power) configured as DPDT or SPDT, as also 3 x A/D 12-bit converters with pre-adjustable readings to 5V, 10V, 20V and 30V conversion (when used with Terminal Blocks PCB or separate external resistor). Now, with number embedded sensors (inbound current, outbound current, temperature, voltages), true 3.3V 1-wire interface, optional RS232 interface and many, many additional functionalities!!

The UPS PIco HV3.0A HAT Stack is equipped with a 450mAh 15C LiPO battery (able to supply 6.5A) specially designed to enable safe shutdown during a power cut. Additionally, this can be easily upgraded to the extended 4000mAh or 8000mAh versions, which enables prolonged use of a Raspberry Pi for up to 16 hours without a power supply connected!

Now, with new add-on board (PIco LP/LF Li-Ion 18650 Battery Holder) you can use all types of the Li-Ion 18650 batteries from electronic cigarettes approaching total capacity of 7200 mAh, as also 18650 LiPO and LiPo4Fe (called 123).

The UPS PIco HV3.0A HAT Stack with Battery 450 is powered and the battery pack intelligently charged via the GPIO pins on the Raspberry Pi®, therefore no additional cabling or power supply is required. Due to that UPS PIco HV3.0A Stack 450 requires no external powering and fits within the footprint of the Raspberry Pi®, it is compatible with most cases, including official Raspberry Pi case with closed lid (Top-End Version)

The new PCB is 2 oz copper 4 layers, especially designed for powering systems offering Multilayer Copper Thermal Pipes for increased System Thermal Response and better passive cooling!!

UPS PIco HV3.0A 450 HAT Stack Core Features


The list of features of the UPS PIco HV3.0B HAT Stack with Battery 450 are as follows:

General

  • Raspberry Pi B HAT Compliant (HAT dimensions and HAT EEPROM)
  • Plug and Play – Ultra Simple Semi-Automatic Installation via GitHub
  • Standard Interrupts driven interaction with Raspberry Pi® based on Daemons using GPIO27 (Pin13) & GPIO22 (Pin15)
  • (Optional) GPIO free (all GPIOs are available for user application) interaction with Raspberry Pi® is based on current consumptions and I2C activity
  • Simple status email broadcasting application based on Daemons when Powering Status Changed
  • Enhanced System Monitoring and Programming API
  • Labeled J8 Raspberry Pi® GPIO Pins for Easy Plug & Play of experimental cables
  • Standard THT 40 Pin connector (not soldered)
  • Local bootloader (standard) for Live Firmware Update

Powering Options

  • Intelligent Uninterruptible Power Supply (UPS)
  • Mobile Battery Power Bank (starts-up without cable power cycling)
  • File Safe Shutdown and Start-up Functionality on a Single Button
  • Integrated LiPO Battery 450 mAh 15C (10-15 Minutes of Power Back-Up)
  • 5V 2.6A Power Backup (Peak Output 5V 3A)
  • No Additional External Power Input Required. System is monitoring power status over 5V GPIOs, therefore is compatible with 99.9% of all existing cases
  • Additional programmable 5V power source with battery backup, available for user applications also when Raspberry Pi is OFF (5V@750mA) protected with PPTC FUSE and reverse current flow diode, controlled by User and RTC Scheduler.
  • User and RTC Scheduler controlled 2A@3.3V protected output (sourced from independent and dedicated LDO)

 

Supported Batteries Types and Capacities

  • Support for LiPO, LiFePO4 and Li-Ion Chemistry Batteries on the same PCB (with high current cable connection) with dedicated plastic base
  • Support for Li-Ion 18650 low cost batteries (from Electronic Cigarettes) with dedicated mounting base PCB screwed on top
  • Support for LiPO 18650 batteries with dedicated mounting base PCB screwed on top
  • Support for LiFePO4 18650 batteries with dedicated mounting base PCB screwed on top
  • Intelligent Automatic Battery Charger
  • Available Standard Batteries Capacities are:
    • LiPO 4000 mAh
    • LiPO 8000 mAh
    • LiPO 1500 mAh
    • LiFePO4 4000 mAh
    • LiFePO4 8000 mAh
    • Li-Ion from 1200 mAh up to 7200 mAh
    • Any user selected 16850 battery capacity

Embedded Peripherals and Interfaces

  • 3 User Programmable LEDs for user own application with additional connectivity to external User LEDs 
  • 3 User Programmable Buttons for their own application with additional cable connectivity to external User Buttons 
  • (Optional) Bi Stable Relay (Latching - Zero Power) assembled on two different mounting positions:
    • with two galvanic isolated independent contacts DPDT 1A/30V
    • with single high current contacts SPDT 2A/30V (HV3.0B only)
  • Integrated True 3.3V ESD protected 1-wire interface (with voltage converter to 3.3V) connected directly to the GPIO4 
  • Integrated ESD-Protected 3 x 12-bit A/D converters with voltage conversion embedded calculators and raw data option (implemented in firmware extensive Lowpass and Olympic Score filtering):
    • 0V-5.2V
    • 0V-10V
    • 0V-20V
    • 0V-30V
  • Infra-Red Receiver Sensor Interface (IR Not Included) directly connected to the GPIO18
  • Programmable Integrated PWM Sounder (programmable by user API or Automatic), able to play music
  • Integrated Hardware Real Time Clock (RTC) with Battery Back-Up
  • PWM fan control with dedicated Temperature sensor touching the Raspberry Pi ® PCB, based on Raspberry Pi or Embedded Temperature Sensor (Fan need to be ordered separately)
  • On Battery Powered System Available Running Time (calculated on battery capacity, Battery Level and System Current Consumption)
  • (optional) second RS232 port (5V tolerant, or 12V via Terminals Block PCB)

Embedded Sensors

  • Outbound current measure sensor when Battery powered
  • Inbound current measure sensor when Cable powered
  • NTC based onboard temperature sensor
  • (Optional) TO92 Temperature sensor
  • Battery Level Voltage
  • Raspberry Pi GPIO 5V level

User/Programmer Interface

  • I2C PICo API Interface for Control and Monitoring, with over 50 programming registers
  • Support for 3 different users selectable I2C addresses sets:
    • DEFAULT: 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F
    • NO_RTC: 0x69, 0x6B
    • ALTERNATE: 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F

System Schedulers

  • Basic Time Scheduler
  • Event Triggered RTC Based System Actions Scheduler (ETR SAS)

       System can wakeup and sleep on external or internal events like:

  • temperature,
  • 3 x A/D levels,
  • voltage,
  • RS232 data;

       as also can trigger Actions like: Relay, Auxiliary Voltage ON/OFF, RS232 data with or without involvement of the 
       Raspberry Pi®Always based on internal Hardware RTC

Case Compatibility

  • No Additional External Power Input Required. System is monitoring power status over 5V GPIOs, therefore is compatible with 99.9% of all existing cases
  • Fits Inside Most Existing Cases as no extra cabling is needed
  • Fits inside to the Official Raspberry Pi Case with closed lid (version Top-End only)

 System Monitoring

  • Status Monitoring – Powering Mode, Inbound current, Outbound current, Powering Voltage, UPS Battery Voltage, Current and Temperature
  • Events Pi Log feature
  • System LEDs – UPS, BAT, CHG, INF, FAN (optionally selected can be mapped to User LEDs)
  • System Healthy, that informs user remotely if Raspberry Pi and UPS Pico HV3.0 are running properly and system is power protected (based on various internal system triggers)

User Applications Security

  • (optional) 2-way XTEA Based Encryption Engine for User Intellectual Properties protection

System Protection

  • Direct Raspberry Pi® Hardware Reset Button via Spring Test Pin (pogo pin)
  • Programmable Watch-Dog Hardware feature (Still Alive Timer)
  • PPTC 2.6A fuse
  • ZVD circuit on 5V GPIO connections
  • Microcontroller watch-dog
  • Over Temperature protection
  • Over Current protection

System Design

  • Designed and Analyzed with one of the most advanced CAD/CAM Tools - Mentor Graphics PADS
  • Design Based on Microchip 16-bit 16MIPS micro controller
  • Industrial Originated

PCB Construction

  • 2 oz copper PCB manufactured for proper high current supply
  • 6mils track/6mils gap technology 4 layers PCB
  • PCB Surface Finishing - Immersion Gold
  • Multilayer Copper Thermal Pipes for increased System Thermal Response and better passive cooling

Designed and Manufactured in Europe

 

Latest Firmware and Manual

 

 

Item Options
The UPS PIco HV3.0B HAT Stack is offered by default with 450 mAh 15 C battery. However customer can add to his order one of the High Capacity batteries with various chemistry. Each battery is with plastic mounting base, spacers, and screws.
no extra battery (Add €0.00)
Each UPS PIco HV3.0B HAT Stack with Battery 450 can be upgraded with Terminals Block PCB that provide an industrial access to the I/Os. In addition a RS232 12V level converter is included on this PCB.
no Terminals Block PCB (Add €0.00)
The UPS PIco HV3.0B HAT Stack with Battery 450 is supplied to customer without Bi Stable (Zero Power) Relay. Our company is offered the extra assembled Relay with Terminal Block for it.
Add Bi Stable Relay to PCB (assembled) (Add €4.50)
no Bi Stable Relay (Add €0.00)
Each UPS PIco HV3.0B HAT Stack with Battery 450 need to have soldered a few components (FAN Kit, Electromagnetic Sounder, Gold Plated Reset Pin - Pogo Pin, and I/O Pins Header). Our company is offering a very low cost soldering service.
Assembled for Raspberry Pi3 (Add €2.00)
Assembled for Raspberry Pi2 (Add €2.00)
Not Assembled (Add €0.00)
Item Price
Your Price
€26.49
Out of Stock!
Featured Items
PIco LiFePO4 Battery 3000 mAh 2C (with plastic mounting base)
PM_055
PIco LiFePO4 Battery (Long Time) with mounting plastic base
€22.00
In Stock!
UPS PIco HV3.0B+ HAT Top-End 450
PM_072
NEW PRODUCT - UPS PIco HV3.0B+ HAT Top-End 450. Designed for the Raspberry Pi® 3 Model B+
€29.99
In Stock!
UPS PIco HV3.0B+ HAT Advanced 450
PM_071
NEW PRODUCT - UPS PIco HV3.0B+ HAT Advanced 450. Designed for the Raspberry Pi® 3 Model B+
€42.00
Out of Stock!
UPS PIco HV3.0B+ HAT Stack 450
PM_070
NEW PRODUCT - UPS PIco HV3.0B+ HAT Stack 450. Designed for the Raspberry Pi® 3 Model B+.
€28.99
In Stock!
PIco Double Li-Ion 18650 Battery Holder
PM_039
NEW PRODUCT - PIco Double Li-Ion 18650 Battery Holder
€9.99
In Stock!
PIco Single LP/LF, Li-Ion 18650 Battery Holder
PM_038
NEW PRODUCT - PIco Single LP/LF, Li-Ion 18650 Battery Holder
€7.99
In Stock!
UPS PIco HV3.0A Stack with 450mAh Battery.
Designed for the Raspberry Pi® 3.
Compatible with Raspberry Pi®:Pi 2, Pi Zero/W, A+, B+
Powered by Pi Modules