UPS PIco HV3.0 Case Type B LP Stack / Stack Plus / Advanced (for LiPO 4000 mAh battery)
for use with
Raspberry Pi® B+, Pi2 Model B, and Pi3 Model B, B+
Flat Shipping Rate with Registered Air Mail only 6 EURO over the world for any QTY ordered
Ordered Item contains:
- All required plactic parts for full working case assembly
- All required HEX Allen screws and nuts, plastic spacers
- Long Buttons extensions (4 pcs)
- Plastic spacer stabilizing the long buttons assembly
Ordered Item does not contain and should be ordered separately if needed for specific application:
- UPS PIco HV3.0
- Battery LiPO 4000 mAh
- Raspberry Pi2/3 Model B, B+
- Infrared Receiver
- PIco Fan Kit HV3.0
The UPS PIco Case does not contain the UPS PIco HV3.0 and does not contain Raspberry Pi model 3.
This case is designed to be used with battery LP4000 and Terminal Block PCB, however can be used also without it. It is addressed also to the UPS PIco HV3.0 Plus.
UPS PIco HV3.0 Case is a laser cut clear gray acrylic enclosure designed by Pi Modules to provide the perfect protection for both the Raspberry Pi and UPS PIco at the same time! It contains all required cut-offs for additional cabling (for the Termnal Block PCB as also for UPS PIco HV3.0 Plus)
The UPS PIco Case HV3.0 is a compact and complete all-in-one solution that allows access to I/Os, Powering and User defined Buttons. Due to clear grey color all Raspberry Pi as also UPS PIco HV3.0 LEDs are visible. The UPS PIco HV3.0 Case also features access to Fail-Safe Shutdown Button and all User Defined Buttons on the top of the case and enables clear access to the integrated UPS PIco temperature sensor, which enables users to keep track of your Raspberry Pi system temperature.
All UPS PIco cases are made from tough high quality clear acrylic material, and are screwed with Hex allen 4 screws (inluded). The Raspberry Pi is also harware mounted (with screws and spacers, inluded) to the bottom of the case. The top of case is openning and allows user acesss without removing system from the case. The UPS PIco Case is compatible with both the Model B+ Raspberry Pi2 Model B.
There is enough place on the top for battery LiPO 4000 mAh as also addtional HAT board.
The UPS PIco HV3.0 Case Features:
- Compatible with Model B+ Raspberry Pi 2/3 Model B, B+.
- Very durable due to screewed assembly
- Top Acess to the internals via openning top door
- Made from Tough High Quality Clear Acrylic
- Air Vents to Keep Your Raspberry Pi & UPS PIco
- Fulls access to I/Os, and buttons