UPS PIco HV3.0A 450 mAh Stack
Uninterruptible Power Supply with Peripherals and I2C control Interface
Designed Especially for the Raspberry Pi® 3
Raspberry Pi®: Pi 2, Pi Zero, Pi A+, Pi B+
3 A total current Supply with GPIO Powering Input and Battery Back-Up
Hardware RTCC, Bi Stable Relay (optional), 3 x 12 bit Fast prescaled A/D
NEW !! User Selectable Assembly Service,
Flat Shipping Rate with Registered Air Mail only 6 EURO over the world for any QTY ordered
Due to volume of pre orders each new order will be dispached within 7-10 days
Pre Ordered Item contains:
- UPS PIco HV3.0A 450 mAh Stack PCB with all described below long list of features
- LiPO Battery 450 mAh 15C
- Not Soldered 2 x 8 Pins headers for all specified below I/Os
- Not Soldered Gold Plated Reset Pin
- Not Soldered Electromagnetic Sounder
- Mounting Spacers, screws, nuts need to mount on the Raspberry Pi® microcomputer
Ordered Item does not contain and should be ordered separately if needed for specific application:
- Infrared Receiver
- High Capacity Batteries (4000 mAh, 8000 mAh)
- UPS PIco HV3.0A Terminals Blocks PCB
- PIco FAN Kit 3.0
The UPS PIco HV3.0A 450 mAh Stack is an advanced uninterruptible power supply for the Raspberry Pi® that adds a wealth of innovative power back-up functionality and development features to the innovative microcomputer!
Especially designed for the Raspberry Pi® Pi3 but also compatible with all other models; offers now maximum 3A current from the GPIO (if supplied) or battery backup, 3 User Keys, 3 User LEDs, 3 different types of high capacity batteries, 2 x 3 pins bi-stable relay (zero power), as also 3 x A/D 12 bit converters pre-adjusted to 5V, 15V and 30V conversion. The New UPS PIco HV3.0A 450 mAh Stack is an all-in-one tool that allows implementing easy and fast simple applications as also complicated projects providing a set of pre installed peripherals.
The UPS PIco HV3.0A 450 mAh Stack is standard equipped with a 450 mAh 15C LiPO battery specially designed to enable safe shutdown during cabled power cut and automatic system restart when cabled power comes back. The included battery provides enough energy to keep running system for 5-8 minutes. Additionally, this can be easily upgraded to the extended 4000mAh version, 8000 mAh, which enables prolonged use of a Raspberry Pi for more than 20 hours (if biggest capacity battery applied) without a power supply connected!
The UPS PIco HV3.0A 450 mAh Stack design support now batteries with different chemistry: LiPO as also LiFePO4. Especially the LiFePO4 batteries are addressed to applications where temperatures environment is more restricted as can be used for supplying from -10 degrees up to +60 degrees and charging 0 degrees up to +40 degrees. In addition the LiFePO4 batteries have an unique extremely long life of charging/discharging that can achieve up to 2000 cycles!!
The implemented trimmed Hardware Real Time Clock and Calendar, quarantine time stamp when system is running without access to the Network. The Hardware RTCC is backed up and powered from the integrated system battery. The RTCC current consumption is only 1 uA.
The integrated Hardware RTCC enables a new extremely usefully feature – the Events Triggered RTCC Based System Actions Scheduler. The Events Triggered RTCC Based System Actions Scheduler allows to timely start up, or shutdown the Raspberry Pi® on various internal or external events that include, 1-wire, IR, A/D, RTCC, temperature, Opto Coupled Input or just on requested Time Stamp.
Professional developers often need to protect their application. In order to support them UPS PIco HV3.0A 450 mAh Stack offers the XTEA dual path encryption (on read and write path) embedded engine that protect the developed software with the secure code.
The UPS PIco HV3.0A 450 mAh Stack offers 2.6A battery power backup for the Raspberry Pi®, but not only. In addition is offerring an independent from the Raspberry Pi® powering, battery backed output of 5V@750 mA available for the user devices connected to the Raspberry Pi® that must be running even if the mother Raspberry Pi® is shut down and not powered (i.e. USB powered HUBs, WiFi Routers, Motion Detectors, HDDs etc). The total current should not exceed 3A. The power supply delivered via GPIOs to the Raspberry Pi® is 2.6A
Many applications need to have secondary RS232 in addition to the primary one offered by the Raspberry Pi®. Until today, it has been solved by users with add-on hardware put on the top. Not anymore!! With the UPS PIco HV3.0A 450 mAh Stack user have access to integrated secondary serial port 3.3V level but save also to be used with 5V (with the same pins). This makes the developed application cost effective and more robust. This software driver is under development and wil be delivered within 1 month after system delivery.
Now with additional Terminals Blocks Add-on UPS PIco HV3.0A offers a professional I/O connectivity for any industrial application including 12V level converter for both Serial Ports (one of them must be selected).
The Zero Power Bi Stable Relay (available as an asembly option) offers two independent sets of NO terminals, offers up to 1A contacts able to switch ON/OFF various peripherals of the developed system. Due to unique design, no power is required when Bi Stable Relay is in Set/Reset State, making it ideal for battery powered applications.Two independent 3 pins sets offered (NC, NO, COM) are switched at the same time.
The IoT developers will find usefully the 3 ESD protected 12 bits buffered A/D converters as also number of internal sensors and sensor interfaces that can be used for system monitoring such as Battery Voltage, Raspberry Pi Voltage, System Temperature and 1-wire interface.
The UPS PIco HV3.0A 450 mAh Stack can also be equipped with an optional Infra-Red Receiver which is routed directly to GPIO18 via the PCB. This opens the door for remote operation of the Raspberry Pi® and UPS PIco HV3.0A 450 mAh Stack!
The embedded Electromagnetic Programmable Sounder can be used as a simple buzzer but also as music player due to implemented sound generator and dedicated programmer interface.
Finally, the UPS PIco HV3.0A 450 mAh Stack features an implemented Automatic Temperature Control PWM FAN controller, and can be equipped with a micro fan kit (offerede for fgree for each pre-ordered PIco), which enables the use of the Raspberry Pi® in extreme conditions including very high temperature environments. The FAN speed is automatically adjusted according to system temperature conditions semi linearly (8 levels) from 0 % (FAN is OFF) up to 100% by increasing and decreasing rotation speed according to system temperature. Thus guarantees the possible lowest level of noise and always cool Raspberry Pi® 3.